OIL & GAS PIPES

SKU: OIL & GAS PIPES

  Ask a question
Store
0 out of 5
Category:

TYPES OF OIL & GAS PIPES

Steel pipes can be classified according to multiple criteria, such as:

– Manufacturing process: seamless, erw, lsaw, dsaw, hsaw pipes

– Finishing: cold rolled, hot rolled, cold finished

– Materials: carbon steel, stainless steel, nickel alloy steel pipes

– Manufacturing norms

 

PIPE TYPES BY EXECUTION

SEAMLESS PIPES

Seamless pipes are manufactured by drawing a solid billet through a piercing rod that creates the hollow section. These tubulars are considered superior to other types as they do not require welding activities and the final product is obtained from a monolithic block of steel (a steel billet). Seamless pipes from 1/8 to 6 inch. are manufactured with the so called “plug mill process” or the “extrusion process” (used for smaller diameters), whereas the “mandrell mill process” is used for larger diameters. Seamless pipes have an higher price when compared to erw and saw pipes, as the manufacturing process is more complex and requires higher investements (several mills have vertically integrated processes, from raw material to billets and final products). For specific sizes and specifications (diameter / thickness / materials), the number of companies is the world is limited and prices are remarkably higher (these should be accounted for properly when estimating project costs by weight).

 

WELDED PIPES

ERW

ERW pipes (electric resistance welding) are manufactured by welding steel coils longitudinally. The high-frequency induction technology (HFI) is the most widespread process for this type of pipes and tubes: an induction coil is applied on the outer surface of the bar and it generates a current which joins the two sides of the coil together very tightly. They HFI welding technology is superior to the ordinary welding tecniques and is used for critical pipes applications (such as pipelines and chemical processes). ERW tubulars are a good alternative to seamless pipes for specific applications and size ranges.

SAW

Submerged arc welded tubulars are manufactured by bending and welding ordinary steel plates. The SAW type is commonly used for oil and gas transmission lines (the recurring specification for this type of pipes is API 5L in various material grades). These tubulars are generally more expensive than ERW’s in the size range from 16 to 24 inches (whereas they are the only choice for sizes above 28 inch., which can’t be covered by seamless pipes or other type of pipes). The most common variations of submerged arc welding pipes are:

LSAW

(longitudinal welding), DSAW (double submerged arc welding, the weld is applied on both the inner and outer surface) and SSAW or HSAW (spiral welded pipe, generally used for water transmission and distribution but not for oil & gas applications). Submerged Arc Welded Steel pipes) in leaflets plate as raw material, the steel plate in the mold or molding machine pressure (volume) into using double-sided submerged arc welding and flaring from production.

 

PIPE TYPES BY MANUFACTURING NORM

Considering construction norms, pipes can be divided into the following main types:

· ASME B36.10 (carbon / alloy pipes) and ASME B36.19 (stainless and nickel alloy pipes)

· API 5L (linepipes for midstream oil & gas)

· API 5CT (octg tubing / casing pipes for upstream applications)

· EN / DIN / BS (european pipe standards)

Whereas other pipes classifications exist (example by application: water, plumbing, oil & gas, linepipes, compressed air, octg, process piping, etc or by pipe end: BE, PE, T&C, THD, etc) the one outlined above are considered the most important ones.

Be the first to review “OIL & GAS PIPES”

There are no reviews yet.

No more offers for this product!

Shipping Policy

privacy policy
Processing of personal data on the basis of the person 's consent
those data for the purpose of sending commercial messages and for other purposes
direct marketing of Internet merchants.


Data protection
1. IDENTIFICATION OF DATA CONTROLLER AND CONTACT DETAILS
1.1. Your data controller is Steel Gate (hereinafter referred to as "Controlor").
1.2. Administrator contact details are as follows: mailing address: office@steelpipes.ro, Phone: +4 0773 997 780
1.3. The administrator did not designate a Data Protection Officer.


2. LEGAL BASIS FOR THE LEGITIMATE PROCESSING OF PERSONAL DATA
2.1. The legal basis for the processing of your personal data is your consent to the Data Controller within the meaning of Article 6 (1) (a)
of Regulation (EC) No. No 2016/679 of the European Parliament and of the Council on the protection of individuals with regard to the processing of personal data and on the free movement of such data and repealing Directive 95/46 / EC (General Data Protection Directive) further "Regulation").


3. PURPOSE OF PERSONAL DATA PROCESSING
3.1. The purpose of processing your personal data is to send you tax documents for system rental, commercial communications, and other marketing activities by the data controller.
3.2. There is no individual, automatic Data Controller within the meaning of Article 22 of the Regulation.


4. PERIOD OF STORAGE OF PERSONAL DATA
4.1. The period for which your personal information will be stored by your Data Controller is 3 years, but no more until your consent to the processing of your personal data (for that purpose) is withdrawn.


5. OTHER DESTINATIONS OF PERSONAL DATA
1.1. Your personal data will be shared with the following recipients. Focus Web Design SRL (server administrator), myLoc managed IT AG, Urgent Cargus Romania (Transport company).


6. PERSONS 'RIGHTS RESPONSIBLE FOR DATA RESPONSES
6.1. Under the terms and conditions set forth in the Regulation, you have the right to request from your administrator access, rectification or deletion of your personal data or the limitation of their processing, the right to object to the processing of your personal data and the right to portability of personal data.
6.2. You have the right to withdraw your consent to the processing of your personal data to the Data Controller at any time.
However, this does not affect the lawfulness of processing your personal data based on your consent before withdrawing it.
Your consent to the processing of personal data may be withdrawn by e-mail at office@steelpipes.ro
6.3. If you believe that your personal data processing or the Rules have been violated, you have inter alia the right to file a complaint with a supervisor.
6.4. You are not required to provide your personal information. The provision of your personal data is not a legal contractual requirement and is not necessary for the conclusion of a contract.

These terms shall enter into force on 25 May 2018

General Inquiries

There are no inquiries yet.

Translate »

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.